Currently on Back order from the supplier.
The Robobrew is an all in one brewing systems that utilizes recirculating pumps, making brewing simple and convenient; All-grain brewing has never been easier!
The Robobrew unit is an all-in-one electric brewing system that has built in burners for heating and boiling, a pump used to recirculate the wort, an on-board water resistant control panel for setting and monitoring temperatures, a removable grain basket, and a very handy built in spigot for transferring. It is extremely portable and uses 110v power so no need for a special outlet.
Built in magnetic drive pump to easily recirculate the wort during the mash. We recommend purchasing additional silicone tubing to go with the re-circulation arm. This allows you to have more control over the re-circulation and you can then use the pump to transfer your wort to your fermenter.
Dual-heating elements run off of a single 110 volt plug and have individual switches allowing for more control over the heating process. One of the elements is 1000 watts and the other is 500 for a combined 1500 watts! Use both for when you need to ramp up the temperature quickly either at the start to get to your mash temp or to go from your mash temp to boiling. Use only one of the elements when you want to hold a temperature.
The digital control panel makes it easy to monitor the current temperature and set the temperature you desire. Also, you can set a delayed start of up to 23 hours in advance so that you can have your water hot and ready to go when you get home from work or get up in the morning. The digital controller is also water resistant so don't worry about spills or some water dripping down the side. This controller is built for brewing!
The RoboBrew also includes a stainless steel malt pipe with false bottom allowing you to easily shift from mash tun to boil kettle during your brew day. The malt pipe includes a handle to lift it from the RoboBrew and tabs at the base so you can set the malt pipe over the RoboBrew to let the wort drain out. It also has feet at its base to raise the malt pipe slightly off the base and help prevent clogging.
Note: We ship this from the vendor and will be shipped separate from your order as well as the included stainless wort chillers is shipped with Blank ends so you can set it up for your situation. We list below the most common tubing and fittings sold to help connect to a hose, hose bib, or faucet.
Specs & Features
- Stainless steel construction
- Dual heating elements for total control (1000 watts and 500 watts)
- 9 gallon total capacity with a finished beer output of 5-6 gallons
- Digital temperature controller
- 110v power and plug
- Stainless steel 1/2 in ball valve for draining (don't have to use the pump)
- Immersion wort chiller included
- Stainless steel malt pipe/basket
- Stamped volume markers
- Glass lid
- Magnetic drive pump for re-circulation and re-circulation arm
- Temperature reads in °F or °C (press and hold temp button for several seconds to adjust)
- 32.75 in H (with re-circulation arm) x 12.5 in D
- Recommended max. grain bill - 18 lbs | Recommended min. grain bill - 8 lbs
WARNING: This product can expose you to Hexavalent chromium, also known as chromium 6 (Cr6), which is known to the State of California to cause cancer, birth defects and other reproductive harm. For more information go to: https://www.p65warnings.ca.gov/