15% Off All Kegging Kits! | Homebrew Kits starting from $69.95! | All Grain Equipment Kit Sale! | Current shipping time

Inkbird Digital Temperature Controller Thermostat - 110v

130-0024
$38.95
(33 reviews) Write a Review

Sorry, we are currently out of stock.

Why buy from Homebrew Supply?
  • Flat Rate Shipping on Most Items
  • Same Day Shipping!
  • 30 Day Return Policy
  • Support a company owned and operated by homebrewers

The ITC-308 is a safe, reliable, and simple to use dual relay output temperature controller! It can be used to control temperatures on a variety of appliances and is perfect for homebrewers needing custom control of their appliance's temperature. The ITC-308 has a Plug and Play design with dual relay enabling the user  to connect with refrigeration and heating equipment and set ideal temperatures. It has an on-board dual LED display, and offers multiple display options such as Centigrade and Fahrenhei. The ITC-308 is designed with compressor delay protection for refrigeration, high and low temperature alarm, and sensor fault alarm, making this temperature controller as safe and reliable as it possibly can be! This product also includes functions such as temperature calibration, the ability to separately set differential for refrigeration and heating, and it also features the ability to enable more accurate temperature control.

General Info

  • Output Power Cable Length: 30cm (1ft)
  • Input Power Cable Length: 1.5m (5ft)
  • Temperature Control Range : -50~99 °C / -58~210

33 Reviews

  • 5
    Inkbird Digital

    Posted by Paul B. on Jun 30th 2019

    Hooked up to older kegerator. Very precise and easy to install and program.

  • 5
    Excellent product

    Posted by Troy R. on Aug 12th 2018

    Works as it should and the price was right

  • 4
    Very nice but.......

    Posted by Gary C. on Jun 16th 2018

    Love the large font on the digital display.
    The instructions are a bit difficult to understand. I use the control strictly for managing a small refrigerator inside the house, so the "heating" function is not used. I wish I could adjust perameters to keep the heating side from activation although there's probably no harm since there is zero load on that circuit. I would simply feel better knowing those contacts would never cycle extending the life of the device. Nevertheless I'm very pleased with it.

  • 5
    Perfect fit for my needs

    Posted by Marvin C. on May 12th 2018

    The temp controller was a perfect fit for my needs, converting an old chest freezer into a beer fridge/fermentation crash site. The old one, which failed, would do only heat or cold, not both. Now I have a proper place to keep a proper pint always ready.

  • 5
    I bought your temp control

    Posted by Wendy S. on May 21st 2017

    I bought your temp control to keep my oven at 88 degrees, the temp necessary to make Tempe. It worked like a charm. My son found the product on line, the staff was helpful in advising me regarding how to use it and I was quite successful.

  • 5
    Really nice piece

    Posted by Shane S. on May 15th 2017

    I like the way it has alarms to tell you something isnt quite right. Will buy again when this one dies.

  • 5
    a good investment

    Posted by pete h. on May 12th 2017

    I purchased one of these plug and play models to eliminate the wiring that comes with other temp controllers . It works great and is super easy to use.

  • 5
    Does exactly what its supposed

    Posted by Jamie K. on Apr 13th 2017

    Does exactly what its supposed to do. Installed this on my keezer. Hold true temp within 2 degrees.

  • 5
    Currently using for fermenting in

    Posted by David B. on Mar 25th 2017

    Currently using for fermenting in a fridge with a brew heat pad. Keeping temps where I need them. Planning on fermenting a lager in the near future to test it better.